Re: TR6 transmission and OD bench testing

[Dave Massey <105671.471@compuserve.com>]

Brian writes:
>If you drive the trans from the output shaft (driveshaft end), you MUST
run the drill
>counterclockwise.  Damage to the OD will occur if you try to engage it
running the
>other way.

Brian,

I don't know how big your drill is but I'll bet the only thing that 
will happen is you'll stall out the drill.  We've stalled out an 
idling Austin Healey motor with no damage to the one way 
clutch (it was in backwards, though) or any other parts of 
the OD.

Dave