> From: "Graham Stretch" <technical-iwnet@lineone.net>
> Date: Tue, 15 Feb 2000 20:19:29 -0000
>
>
> Hi Richard
> The only bit from a four pot is one of the internal components which had the
> correct ratings on it so must have been common to both. the rest of the
> components are all from the original six pot tacho. Thanks for the idea I
> will try it and see what happens. Do you know which bit I should adjust
> first the return spring or the potentiometer? The only thing I would like
I would recommend trimming the return spring to set zero, then the
potentiometer to get the up scale reading correct. Rinse, repeat as
necessary.
> to correct is the fact that the supply does not come from the stabilised
> side of the voltage regulator as these are merely a Bi-metal switch which
> averages the voltage and have an off period every so often that would cause
> the tacho to stop working briefly.
>
> Cheers, Graham.
|