In a message dated 1/12/00 1:21:16 PM Eastern Standard Time, lbc61tr4@usa.net
writes:
<< I've finally located and figured out where all the wiring for the overdrive
goes on my TR4. I believe the O/D unit came from a donor car. Mine was not
originally equipped. Could someone tell me where the relay switch should be
mounted? Also, where abouts do the wires pass through the gearbox cover. I
have the "space age" plastic repro without any holes.
>>
On the bulkhead above the passenger - RH - footwell. There should be 2 rubber
plugs about 3" apart. Remove the plugs and screw in the relay.
Ken Nuelle
58 TR3A
62 TR3B
64 TR4
|