Dave,
I agree with Rod, I replaced my harness when the car was
stripped bare. The harness for a TR4 from TRF is $200+ and doing
the removal of the old wire and install of the new is a lot of on
your back (breaking) work. $375 is more than fair.
On the cam, who set it wrong in the first place? Shouldn't they
make it right for nothing.
Brian Sanborn
62 TR4 CT16260L - Groton, MA
My TR4 Restoration Web Site
http://www.net1plus.com/users/sanborn/Home.html
E-Mail: sanborn@net1plus.com
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of
SpeedSites@aol.com
Sent: Friday, December 10, 1999 9:46 PM
To: triumphs@autox.team.net
Subject: Re: took my tr4 to the shop!
dave-
I don't have a TR4 so I'm not familiar with the wiring, but I
would say that
$375 for inslalling a full wiring harness (if that's what he
means) is pretty
reasonable. At current shop rates, that's about 7-8 hours of
work. I would
imagine it would take anyone at least that long.
Just my 2 cents worth- perhaps someone with more experience will
respond.
Good luck-
Rod Pyle 69 TR6
57 Austin Healey (Boxed)
|