triumphs
[Top] [All Lists]

RE: TR3 originality questions (& parts wanted)

To: Pete Ryner <pryner@ij.net>
Subject: RE: TR3 originality questions (& parts wanted)
From: Andrew Mace <amace@unix2.nysed.gov>
Date: Wed, 1 Dec 1999 22:04:15 -0500 (EST)
Cc: Dan Buettner <danb@thelittlemacshop.com>, triumphs@autox.team.net
On Wed, 1 Dec 1999, Dan Buettner wrote:

> > 2) Front signal lamps are bullet-shaped and clear.  This car should
> > have much flatter lenses, kind of like buttons, I believe -- anyone
> > else know?  And what color should they be?

On Wed, 1 Dec 1999, Pete Ryner wrote:

> ...The signal lamps are the same
> diameter, but are flat, like you mentioned.  They are also available from
> the big 3.  They were "clear" which were actually opaque.

Well, not really opaque, since that would mean no light could pass 
through! :-) According to Lucas, they are the model 488 lamp, and the 
lenses are "circular; fluted" lenses, p/n 572715 (clear, usual fitment 
especially in North America) or 573266 (amber).

Note that one can use the L594 lenses ("beehive" -- p/n 576108 for clear
and 576983 for amber) on the L488 base, but you CANNOT use a lens from an
L488 lamp on an L594 lamp base, as the bulb would stick out too far (L488
bulb is very much recessed into the socket). 

And the retaining rim (572734) is interchangeable as well, although the 
lamp rubber bases are not.

Probably more than most of you wanted to know about Lucas lamps on the 
TR3. ;-)

--Andy

* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and                *
*   10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register <www.vtr.org>    *
* amace@unix2.nysed.gov                     *
* * * * * * * * * * * * * * * * * * * * * * *


<Prev in Thread] Current Thread [Next in Thread>