Kyle,
CF38690 has dealer air and the bottom of the canister bracket was cut
off, I assume to facilitate the routing of a/c hoses. The top of the
bracket mounts normally to the radiator bracket.
Hope this helps,
Jim Davis
Fortson, GA
CF38690UO
CF37325U
"Kyle K. Rice" wrote:
>
> Rod,
>
> My 74 had AC from the dealer. Is it possible that they mounted the bracket
> on the inner passenger side front fender to clear the AC compressor? The
> Moss catalog appears to show it attached to the radiator bracket. Does the
> cannister to anti run-on valve hose point towards the front of the car or
> towards the interior? It looks like I will need to fill some holes in my
> fender.
>
> Kyle.
>
> At 11:02 PM 11/22/99 -0700, you wrote:
> >On the '74 it should be on the right side radiator bracket. Mine are not
> >handy, but I think the TRF & Moss catalogues show where it attaches. On
> >earlier models (don't know yet when they changed) it was on the right
> >engine mount.
> >Rod.
> >
> >At 09:49 PM 22/11/99 -0800, you wrote:
> >>Rod,
> >>
> >>74 TR6
> >>
> >>Kyle.
> >>
> >>At 10:03 PM 11/22/99 -0700, you wrote:
> >>>Kyle,
> >>>What year & what car?
> >>>Rod. '70 TR6 CC55899L
> >>>
> >>>At 06:10 PM 22/11/99 -0800, you wrote:
> >>>>
> >>>>Listers,
> >>>>
> >>>>Could anyone tell me what the bottom of the carbon
> >>>>canaster bracket is bolted to. Mine seems to be bent
> >>>>and I can not find any spot to bolt it to. This is
> >>>>the bracket that holds the anti-runon valve.
> >>>>
> >>>>Thanks Kyle
> >>>>kkrice@earthlink.net
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
|