however, when reinserting the chain, the
>accuracy is sacrificed a bit by the limited number of cogs on the chain
>(it's probably a good 3-5 degrees off).
Nick,
This is a pretty easy fix and should be covered in your Haynes manual. The
holes in the camshaft spocket are designed to allow a 1/4 tooth adjustment by
turning it 180 degrees as it faces you or flipping it over and doing the same
thing. Line up the cam and play with the 4 settings until the holes line up.
Brian Sanborn
'62 TR4 CT16260 Groton,MA
TR4 Website www.net1plus.com/users/sanborn/home.html
|