>The coating will start to melt at 1300 degrees, so brazing of welding should
>be plenty to burn it away. Just be careful not to hit it to hot to fats.
this
>may result in some "popping" of the material. I recommend either mig welding
>or trying to burn or grind off the coating before brazing.
>
>John
>Jet Hot
*********************************************
So It looks like I'll be able to *burn* off the coating in the area in
question -
Barry Schwartz (San Diego) bschwart@pacbell.net
72 PI, V6 Spitfire (daily driver)
70 GT6+ (when I don't drive the Spit)
70 Spitfire (long term project)
|