triumphs
[Top] [All Lists]

RE: TR3A picture needed

To: "'Ken Gano'" <triumphs@mcleodusa.net>, triumphs@autox.team.net
Subject: RE: TR3A picture needed
From: "Musson, Carl" <musson@chekhov.arts.usf.edu>
Date: Fri, 1 Oct 1999 00:24:19 -0400 charset="iso-8859-1"
Are you saying that the bracket that is mounted on the inner wells is either
outboard or inboard to the corresponding cross piece on the apron?  

Could there have been a change of placement at re-tooling?   What is your
commish#?

Carl


                -----Original Message-----
                From:   Ken Gano [mailto:triumphs@mcleodusa.net]
                Sent:   Friday, October 01, 1999 12:22 AM
                To:     triumphs@autox.team.net
                Subject:        TR3A picture needed


                I spent the evening reinstalling the front apron.  I feel
like I have a very
                nice fit, except the front, top attachment points (where the
bowed piece of
                square tubing bolts through the brackets on the inner fender
wells).  There
                is a full and uniform inch between the holes in the apron
and the holes in
                the mounting brackets.  Otherwise, it fit up fine and very
square.

                Can anyone direct me towards a good picture.  I am wondering
if there is
                some sort of spacer in here I am missing.  The closest
picture I can find is
                page 23 of Piggott 1st edition and it appears to be as I
remember, that
                being that the apron and the brackets bolt directly
together.  My only other
                option is to fit the hood and see how the curve looks, but a
picture could
                save a lot of grief.

                TIA

                Ken Gano

<Prev in Thread] Current Thread [Next in Thread>