Date sent: Wed, 22 Sep 1999 20:24:54 +1000
To: triumphs@autox.team.net
From: John Worthy <jworthy@pcug.org.au>
Subject: TR6 PI linkage information
Send reply to: John Worthy <jworthy@pcug.org.au>
Hello John,
I send you the measures I took from the throttle linkage of my 70
PI and I hope they are the ones you are looking for, if not let me
know and I will send you a drawing of the linkage with all the
measures.
Listers
I would appreciate it if some kind soul went out to their TR6 PI and
measured the following two things for me:
1) The length of the installed activating rods (vertical links) from a
throttle lever to the throttle butterfly; and
3 adjustable rods on my car 82mm
2) The length of the throttle lever coming off the throttle linkage to
which the bottom of the vertical link attachs. (Assuming all three levers
are the same length.
1 cam lever and 2 arms fixed to linkage all 40mm
Thanks in anticipation
John
Hope this is what you are looking for
Regards
Jean R
70 TR6 PI now on Electronic engine management
|