Message text written by INTERNET:triumphs-owner@autox.team.net
>From: John Jacobsen-Watts <johnw@wrq.com>
>Subject: TRF comp. springs and your experiences.
>Hello listers!
>I have a set of the competition springs, non-lowered, on the back end of
my
>'74 TR6. I am advised to use the TRF SAH606 mild comp. springs on the
front
>end. Does anyone else have this setup and can you comment on the ride
height
>and front/back height difference if any?
<
I can not answer your question exactly. I got the Triumph Tune springs
from Moss.
They are the stock (or close) height mild comp springs for the front and
rear. I also
tightened the rear lever shocks a little and adjusted the front konis as
well. The
ride is MUCH MUCH better compared to the sagged (and weaker) stock springs.
I restored 2+ inches in the rear and less than an inch in the front.
THe ride height is much better and the ride quality is superb.
This is on a TR4A IRS, which is pretty much the same as the TR6.
-Tony
|