To: | Ken Gano <triumphs@mcleodusa.net> |
---|---|
Subject: | Re: extra wire in TR3A wiring harness |
From: | Jim Bauder <jimbpps@att.net> |
Date: | Mon, 13 Sep 1999 11:37:46 -0700 |
Cc: | triumphs@autox.team.net |
References: | <LOBBKJIPOFCFIKGDELBMEENKCFAA.triumphs@mcleodusa.net> |
Ken, Just finished wiring this on my '58 TR3. The large ringed Black wire goes on the front wiper motor mounting frame bolt, as a ground. The small ringed wire goes to the small screw on the wiper motor near the power leads. I believe that these two wires are actually the same wire. The Green with Black go on the bottom terminal of the motor and the two Green wires go on the top terminal. Good luck, Jim Bauder '58 TR3 in fewer and fewer boxes Palo Alto, CA |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | conversion for torque settings, sujit roy |
---|---|
Next by Date: | Re: conversion for torque settings, Michael Ferguson |
Previous by Thread: | extra wire in TR3A wiring harness, Ken Gano |
Next by Thread: | Re: extra wire in TR3A wiring harness, Jim Bauder |
Indexes: | [Date] [Thread] [Top] [All Lists] |