To: | "Dave Massey" <triumphs@autox.team.net> |
---|---|
Subject: | Re: TDC on TR3 |
From: | "Tom Parker" <parkert@ihug.co.nz> |
Date: | 14 Sep 99 02:06:13 +1200 |
Dave Massey <105671.471@compuserve.com> wrote: >Take a coat hanger and bend it so that it fits through the spark >plug hole and watch as it moves up until it stops moving and then >starts back down. Center the crank between the two points >where the hange starts to move and you have TDC. Better to use a piece of soft wire like copper or brass, just in case you get it caught in anything. -- Tom Parker - parkert@ihug.co.nz - http://www.geocities.com/MotorCity/Track/8381/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | TDC on TR3, Dave Massey |
---|---|
Next by Date: | TR6 engine woes, Sam Perera |
Previous by Thread: | TDC on TR3, Dave Massey |
Next by Thread: | TR6 engine woes, Sam Perera |
Indexes: | [Date] [Thread] [Top] [All Lists] |