Checking End Float on a TR6

triumphs

Checking End Float on a TR6

To:	"Triumphs Mailing List" <triumphs@autox.team.net>
Subject:	Checking End Float on a TR6
From:	"Ronald A. Dowty" <rdowty@iso.net>
Date:	Tue, 20 Jul 1999 18:32:23 -0500charset="iso-8859-1"
Importance:	Normal

When measuring end float do I measure from where the crank stops at each end
or how far it goes when under pressure? How much is normal and how much
float should I try to get before I'm really happy?

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Checking End Float on a TR6, Ronald A. Dowty <=

Previous by Date:	RE: Speedometer Overhaul, Tony Rhodes
Next by Date:	Re: Speedometer Overhaul, Fred Thomas
Previous by Thread:	List Quest, Bandre Frank Contractor AMC/SCP
Next by Thread:	looking for MGB list member, Kevin Besig
Indexes:	[Date] [Thread] [Top] [All Lists]