Rear brake lines come off the tee and roll down to run tight against the
axle, but on the front side, not on top.
Rob Robertson
TR3a TS25054
-----Original Message-----
From: Angelo Graham <a3graham@mc1adm.uwaterloo.ca>
To: triumphs@autox.team.net <triumphs@autox.team.net>
Date: Monday, July 12, 1999 4:48 AM
Subject: TR3 Rear brake pipe routing
>
>Hello Listers:
>Wondering if a 3A owner would take a look at their right rear brake pipe
>routing and let me know the configuration? My pipe runs under the axle
>stop "loop". The result is that it has been flattened by getting caught
>between the rubber axle stop and the top of the loop. Is the routing
>through the loop or do I have another problem here, mainly that the spring
>may be a bit slack, and that is allowing the spring to "bottom out" or is
>it "top up" on the axle stop loop, squeezing the brake pipe? Just thought I
>would check.
>
>Thanks for any help on this.
>
>Angelo Graham
>1959 TR3A
>Waterloo, Ont. Canada
>
>
|