Thrust Washers

["Arakelian, Peter" <arakelianp@mossmotors.com>]

I have been following the recent thread about pinning thrust washers with
some disbelief!  I have worked in the automotive parts business for 30 years
for all types of companies including engine rebuilding supply houses.  If
the crank or block have excessive wear they should be welded and reground to
spec.  This can be done for the thrust faces as well as the journals.  A
correctly done crank and block do not need pins.  Sure, pins can be used and
will provide some insurance, but......

Peter Arakelian
Domestic Buyer
Moss Motors, Ltd.
(805) 681-3400 x3214
(805) 692-2510 - Fax