Lee,
> From: Janssen, Lee K [mailto:lee.k.janssen@lmco.com]
> Sent: Thursday, May 27, 1999 8:17 AM
>
> I'm having problems getting my outer window scraper seal
> (door waist seal) to attach correctly to the door. All of the
> clips fit nicely EXCEPT for the one at the rear of the door.
> It appears that either the seal is too short, the clip is too
> short, or the sheet metal lip is too long (same problem for
> both doors). The clip will reach the seal but not enough to
> engage the teeth. After a short period of time the seal
> breaks free again and is flapping in the breeze.
> Any solutions to my problem would be greatly appreciated.
Try getting the same clips from a Spitfire. The shape is identical except
the reach is longer.
Peter Zaborski CF58310UO (with Spit clips on rearmost outer window seals)
|