Andy,
Based on looking at the Moss catalog. The TR3/A part seems quite
different. My seat pans have 2 holes on each side and the rails have 2
each studs that fit into those holes. My seat pans also have the a 1" dish
depression that rides between the rails. The TR3/A seat pans are flat.
Does anyone know if the TR3/A/B rails could be used as a substitute for a
while.
Brian Sanborn
62 TR4 CT16260L - Groton, MA
My TR4 Restoration Web Site
http://www.net1plus.com/users/sanborn/Triumph.html (under construction)
E-Mail: sanborn@net1plus.com
-----Original Message-----
From: Andy <amdixon@erols.com>
To: Brian Sanborn <sanborn@net1plus.com>
Date: Sunday, May 09, 1999 10:41 AM
Subject: Re: TR4 Early 1962-63 Seat Rails Needed - Desperate
>Brian,
>From your description it sounds like these may be the same as the TR3
>seat rails.
>Three bolts/screws hold the rails to the floor (though there's four
holes). the
>seat portion of the rail has four fixed "bolts" to bolt to the seat. A
total of four
>sections for each seat.
>If that is the case, you can contact Ryan at lcarguy@aol.com. He's a 13
>year old who has bought a TR3 parts car. His prices are good and he (well
>maybe his Dad) knows his stuff.
>Andy D
|