triumphs
[Top] [All Lists]

Re: Big plugs in TR-250 floor pans - why?

To: "Triumph List" <triumphs@autox.team.net>, <Aribert_Neumann@magna.on.ca>
Subject: Re: Big plugs in TR-250 floor pans - why?
From: "Don Sforza" <dsforza@megahits.com>
Date: Fri, 7 May 1999 11:49:04 -0400charset="iso-8859-1"
References: <8525676A.004AB2DA.00@mrcvall01ds.magna.on.ca>
TR2's, 3's and 4's were jacked thru these holes.

"And to think, it all started with a tractor!"

Don Sforza           dsforza@megahits.com                  KA1WV
1963 TR4        Connecticut Triumph Register             CT16707L


----- Original Message -----
From: <Aribert_Neumann@magna.on.ca>
To: Skip Montanaro <skip@mojam.com>
Cc: <triumphs@autox.team.net>
Sent: May 7, 1999 9:32 AM
Subject: Re: Big plugs in TR-250 floor pans - why?


>
> Most likely these are manufacturing tooling holes used to locate the
floor
> pan in place while adjoining pieces such as rockers and quarter panels
are
> brought to place prior to welding all together.
>
>
>


<Prev in Thread] Current Thread [Next in Thread>