PFM,
I can't tell by the S/N's but maybe someone else can. If they LOOK right, then
they are probably OK.
The Tach should have 2-1 listed on the dial (the tach drive cable turns
once for two engine rotations). If it says that, it will be properly
calibrated.
What is the calibration of the speedo? It is the number (e.g. 1184) printed
above the MPH on the dial face. For a stock-style TR4, 1152 to 1184 will
be a good calibration. If you have wider tires, then this may not
end up being the best calibration of the speedo. No easy way to
change it, though, without getting new parts inside or a different speedo
entirely.
-Tony
Message text written by INTERNET:triumphs-owner@autox.team.net
>From: "padraic mullin" <paddyfm@hotmail.com>
Subject: tr4 gauges
i have a:
speedometer # sn-6319/06
tach # rn 1411/00
temp #bt 2203/02
can it be determined by these #'s if they will work in a 64 tr4
thanks in advance
pfm
<
|