Brian Furgalus wrote:
>
> Hello all. I will be hooking up tho good old timing light to the new
> TR7, and verify the timing... What should the
> timing settings be on this unit (static or otherwise)? 10BTDC?
You might try setting the advance for maximum RPM, then retarding for a
100 RPM drop -- works on earlier TRs.
> The distributor appears to be at it's maximum end of adjustment, so if
> the timing DOES need to be adjusted, what do I do? I have no adjustment
> left in the unit!
If you're adjusting the timing by turning the loosening the distributor
mount and turning the dizzy body I would think the adjustment to be
infinite (ie 360*). If you're moving it with the little vernier wheel
then loosen the clamp and turn the whole unit if necessary.
Geo Hahn
59 TR3A
|