Gang, I don't have a good asnswer to Ken's message below. (haven't touched
my windows in 30 years and can't remember what I did to fix them then.) If
you could, please answer him directly and copy me. Thanks.
Art Kelly '64 TR4 CT33118L
>>>>>>>>>>>>>>>>>
In a message dated 05-Apr-99 23:49:36 Eastern Daylight Time,
KAVONKLU@defrees.com writes:
Both windows have gone off their tracks, the passenger side
more than the driver's side. The passenger side cannot be rolled up
more than 3/4 of the height of the glass. We have taken the regulator out
and cleaned and lubricated all moving parts. However we cannot get the
regulator adjusted so that the moving arms are in proper relationship to
one another and, consequently, the window is crooked. Is the regulator
broken? Is there some trick to installing the regulator? When we have
the moving arms in a position which would allow the window to travel on
an even keel the pivot bolt is nowhere near the hole in the door through
which the bolt is to be attached to the door. Do you have any
suggestions? Thanks, Ken von Kluck
----------------------- Headers --------------------------------
Return-Path: <KAVONKLU@defrees.com>
|