Re: TR3/TR4 speedo

[George Hahn <geohahn@azstarnet.com>]

Tom Bottman wrote:
> 
> habit of the speedo needle to fluctuate in about 10 mph degrees...

Mine was doing this and only needed a clean and lube to resolve.

If you have not done so, remove the cable from it's housing (can be
easily removed from speedo end) clean and lube.  Can then be eased back
in by fiddling it till it seats in tranny drive.

To see a very useful TR speedo site:

http://ourworld.compuserve.com/homepages/arhodes/

Good luck.

Geo Hahn
59 TR3A