Try racer wholesale or Truechoice motorsports, one of them carries all
sizes of those clamps.
aaron
On Wed, 27 Jan 1999, Chris Lillja wrote:
>
> Some great advice has been given about sealing the transmission tunnel (and
>any
> other hole leading to the engine bay). This is where you should start...
>
> If you have FUEL fumes, try replacing the gasket on the fuel tank level
>sender
> and the short rubber hose that connects the gas cap with the tank. This
>helped
> my 4A quite a bit...
>
> I've been fighting a battle with my new falcon stainless sport exhaust on my
> 4A. Even though it's meant for a TR6, it bolts right up to the twin outlet 4A
> ex. manifold. It fits perfectly, but I've had a lot of trouble sealing it in
>a
> way that will allow it's easy removal. If anyone knows a sourse of
> stainless "wide band clamp" type exhaust clamps in sizes SMALLER than 2"
>please
> let me know. These clamps are awesome-- they're about 3" wide and they seal
> with 2x3/8" bolts.
>
> It's light years better than when I started (Talk about choking me out!), but
> it still leaks just a bit on overrun.
>
> This exhaust gives a sound remarkably like my 850 Commando... but in
> quadraphonic stereo!
> Christopher M.Lillja
> Marketing Associate
> Princeton University Press
> Fax:609 258 6305
>
|