triumphs
[Top] [All Lists]

Re: Rocker panel fit up question

To: George Hahn <geohahn@azstarnet.com>
Subject: Re: Rocker panel fit up question
From: Joe Curry <spitlist@gte.net>
Date: Mon, 25 Jan 1999 08:36:38 -0800
Cc: TR <triumphs@autox.team.net>
References: <012301be480a$737b8420$c686acd1@default> <36AC96B0.78EF@azstarnet.com>
Maybe they are using the theory that "You can always
cut some off, but it is much harder to add some on!"

Joe

George Hahn wrote:
> 
> Paul Schneider wrote:
> 
> > I recently purchased replacement rocker panels from MOSS for my 1960 TR3A.
> > The distance from the rear door post to the rear dog leg was about 1/2" too
> > long...
> 
> I haven't replaced rocker panels/sills but in the "Technical Talk Vol 2"
> published by the Triumph Reg of So Cal sill replacement is covered.
> Seems that poor fit, including too long, is a common problem and the
> writer suspects that most suppliers are using the same source as checks
> with several found similar dimensions.
> 
> Geo Hahn
> 59 TR3A

-- 
"If you can't excel with talent, triumph with effort."
 -- Dave Weinbaum in National Enquirer

<Prev in Thread] Current Thread [Next in Thread>