Worldly Scions,
My daily driver TR6 has slowly developed a tilt (or list) to the driver's
side. I replaced the rear springs with Moss stock springs (red and green
stripes---does that make sense?) and replaced the trailing arm bushings
with poly (SuperPro from Ken at BFE). The mounting brackets are positioned
the same way on both sides (notches facing up).
However, the driver's side is still lower than the passenger side. The
distance from the frame (where the trailing arms attach) to the ground is
5.5 inches (140mm) on the driver's side and 6.375 (162 mm) on the
passenger side.
I'm stumped and turn to the worldly scions for advice.
TIA,
Cregg Cowan
71 TR6 CC 63192
|