Jack,
The Bentley manual for my Spitfire said the same thing, but I was able to
remove and replace the drive shaft while leaving the exhaust in place. Don't
know if you can do the same on the TR6, however.
Dave Moag
77 Spitfire
62 TR3B
> -----Original Message-----
> From: owner-triumphs@autox.team.net
> [mailto:owner-triumphs@autox.team.net]On Behalf Of Jack R. Clark
> Sent: Sunday, October 11, 1998 9:25 AM
> To: triumphs@autox.team.net
> Subject: TR6: Drive shaft removal
>
>
>
> Listers,
>
> The Bentley manual suggests to remove the exhaust system
> in order to remove the drive shaft. Is it possible to do
> this by removing the rear transmission tunnel instead,
> and extracting the drive shaft from above.
> The reason I ask this is that the exhaust pipe joints
> look very difficult to separate. Which way would be easier?
>
> Thanks again,
> Jack '74 TR6
>
>
|