M. Secrest wrote:
>
> > Having the tunnel out of my GT6...I would like to have a functional
> > speedometer. Call me a nut. But I'm not
> > hardly eager to pull apart the tranny in order to have one.
> > Before I put the tunnel
> > back, what are my options here? Slim and none?
>
On Sat, 19 Sep 1998, Jerry wrote:
>
>... as I remember it you have to pull the tranny....
Fortunately, Martin, I believe Jerry's memory is a bit off (sorry,
Jerry). According to the factory workshop manual, it can be done "in
situ" as it were. "Take out the locating bolt and withdraw the
speedometer drven gear and bearing, remove the 'O' rings and extract the
seal. Press a new seal into the bearing, fit the 'O' rings and insert the
driven gear. Fit the assembly into the rear extension and secure with the
locating bolt and spring washer."
The preface and postscript to the above simply mention removing or
reinstalling the facia support bracket, carpet and gearbox cover.
So I think you're ok on this one, Martin!
--Andy
* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and *
* 10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register *
* amace@unix2.nysed.gov *
* * * * * * * * * * * * * * * * * * * * * * *
|