I couldn't find any, so I cut down some longer ones with my nippers. You can
cut about 6 at a time. I also cut some to 3/16 of an inch. Use the longer
ones for thicker areas like the back of the door pocket. When I replaced my
damaged panel using the old vinyl (still in good shape), I also used silicon
where the heat welds bonded the vinyl to the backer board.
I had to use full size staples to back up the shorter ones in the staple
gun. I colored the last 5 or so staples with a permanent marker. When I saw
a colored staple, I knew I needed to reload.
Brian Kemp
72 TR6
|