I believe the setting is to tighten the nut to 5 ft lbs and then back off
one flat. I've never had much luck with that approach and usually just go
by feel. I haven't had a hub fall off yet.
aaron
At 10:36 AM 9/2/98 -0400, Keith S. Ehrlich wrote:
>
>Listers-
>
>I recall in the past a number of posts regarding setting end float for
>the front wheel hubs on TR6 without a meter. As I remember, the
>instructions were to turn the slotted nut to a point and then advance or
>back off a certain amount. Could those in-the-know please give me some
>instruction on this? Off-list is OK, though others might want a
>refresher course.
>
>TIA
>
>Keith Ehrlich
>74 TR6
>
|