The pawl is the toothed device on the front of the crankshaft with which the
crank engages - the item you refer to as the pawl is what I would term a
support bushing, although Moss refers to it as "GUIDE, Starting handle"
(Part #802-885).
-----Original Message-----
From: George Richardson <gprtech@frontiernet.net>
To: KMNTR6@aol.com <KMNTR6@aol.com>
Cc: triumphs@autox.team.net <triumphs@autox.team.net>
Date: Tuesday, August 25, 1998 6:04 PM
Subject: Re: Need Help Trying to Hand Crank my TR3
>
>If your front valence has been damaged in the past and patched up, that
>could cause this problem. The pawl that the crank goes through is held
>
>I think there are different part numbert for a TR3 and a TR3A pawl. they
>might be different heights. If so, and someone installed a 3A version on
>your car, that could also cause a problem.
>
|