Fred,
Any chance the tire is rubbing on anything? Fender under a bump
condition? I would think that excess wear on the outside would
be either too much toe in or way too much positive camber (top
of tire leaning to the outside). If it was too much toe then
I would think the wear would be on both front tires though.
Just some thoughts.
Drew
On Aug 24, 12:40pm, fred thomas wrote:
> Subject: align.
>
> Listers, is there any little secret to aligning the F.E. on a T/R 3-A,
> the R.F. on my car wears out a tire very quickly, with all the wear only
> on the far outside tread, the three inner treads are wearing just fine,
> yet when you put it on the machine it is with-in factory specs. Any ideas
> or suggestions. Thanks "FT"
>-- End of excerpt from fred thomas
--
Drew Rogge
drew@pixar.com
|