I received another set of bushings yesterday (TRF)
I will give it a try this weekend
Thanks for the info and inspiration
-----Original Message-----
From: Brian Kemp <bk13@earthlink.net>
To: Charles Ackerman <C2H60_@email.msn.com>
Date: Tuesday, August 11, 1998 6:59 PM
Subject: re:"GO" pedal shaft bushings
>This builds upon the detailed response posted several months ago
>by another list member.
>
>I microwaved mine in a cup of water for 5 minutes. I used KY
>jelly (wipes off - no mess) and a 1/8 inch dull screwdriver to
>push the bush in the hole. Rotate the bushing with a large
>screwdriver until it's pushed in all around. Verify from inside
>that the bushing is through. It took 10 minutes of effort to get
>both bushing in, though the engine was not in the car.
>
>To get the shaft back through the first bushing took another 10
>minutes and some sweat. Push hard and use more lubricant. It
>finally just just went in.
>
>It will work.
>
>Brian Kemp
>72 TR6 with new bushings in Apr
>
>
|