> Question is...what is the best way to check and see if the pump is
> pumping? also any other ignition check suggestions would be welcomed.
> It's been 750 miles since last PM and this is the first sign of trouble.
>
Tom,
Pull the hose where the gas goes into the front carb and place it so any gas
from it will go into a can (or you can let it go all over the place for kicks
and thrills). Now push in the starter button on the soleniod. You should get
a strong spurt of gas each other engine revolution. If the gas just dribbles
out, or doesn't flow at all, the pump is bad or the fuel lines are blocked. If
you have gas, then the problem is in the carbs.
Bruce Clough
'62 TR4
|