> From: InnaComa@aol.com [SMTP:InnaComa@aol.com]
> Sent: Thursday, June 11, 1998 3:08 PM
>
> The manual calls for 90 weight GL4, but a mechanic who rebuilt my gearbox
> said
> I should use 30 weight engine oil because the overdrive wouldn't function
> properly with the 90 weight gear oil. Any information would be
> appreciated.
>
Other opinions may surface but...
My J-type functions just fine with 90wt GL4 (note: GL4 is important, don't
use GL5 - apparently GL5 will cause premature wear on any yellow metal
components in the gearbox and overdrive). I use StaLube I think which I
bought at a generic Auto Parts store in Seattle (I live in Canada and I had
a hard time finding GL4, only found GL5).
FWIW, my o/d engages in about 1/2 second after I flip the switch.
Good luck,
Peter Zaborski
76 TR6 (CF58310 UO)
Calgary AB Canada
|