| To: | TR6 list <triumphs@Autox.Team.Net> |
|---|---|
| Subject: | Re: TR6 Zenith mixture "adjusters" |
| From: | Jim Davis <jhdavis@fiac.net> |
| Date: | Mon, 01 Jun 1998 22:20:55 -0400 |
| References: | <0ETW0077575CMU@idalee.loudoun.com> |
Andy, I used an unsharpened pencil to drive the screw and washer out to replace the O rings. Problem is the damned things still leak, just not as bad. Atlanta Imported had the correct O rings. Good Luck, Jim Davis Fortson, GA CF38690UO CF37325 Andy wrote: > Has anyone successfully removed the adjusters without damage to the air > valve? > If so, how? > TIA > Andy |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: theft prevention..., Allen Nugent |
|---|---|
| Next by Date: | Emission Control Valves converting to PCV?, Chris Oliver |
| Previous by Thread: | RE: TR6 Zenith mixture "adjusters", Peter Zaborski |
| Next by Thread: | Re: TR6 Zenith mixture "adjusters", Steve Chandler |
| Indexes: | [Date] [Thread] [Top] [All Lists] |