At 08:06 PM 5/26/98 -0400, John Middlesworth wrote:
>
>I am replacing the throttle shafts in my TR4A (with Zenith-Stromberg
>carburetors). Moss supplied two shafts that are 6 1/4 inch long, while
>the originals are only 5 inches long. The only thing I can figure is the
>part they've sent is to the rear carb on a TR250-6. Does that carb take a
>longer shaft from the front one? What should I do, just pull out the old
>hacksaw and turn the pieces into 5 inch throttle shafts?
John,
The throttle shafts Moss supplied for my SU's had to be cut to size. I
rationalized they make one shaft for all applications, and it is up to us
to make the replacement shaft fit. It really was quite easy.
Picking up TR250 #3 today!!!
- - - - - - - - - - - - - - - - - - - - - - - - -
Henry Frye E-mail - thefryes@iconn.net
TR3B TCF1927 L http://www.iconn.net/thefryes/
TR250 CD8096 L A Little Town In
TR250 CD1074 L Connecticut, USA
|