Re: "clunk on fast acceleration"

[oconnor@fuse.net]

Brian Kemp wrote:
> 
> 
> A torque wrench is a very valuable tool for applications like those six studs
> holding the rear hubs/backing plates.  26-28 lb-ft isn't very much.
> 
> Brian
> 
Correct me if I'm wrong, but the torque on these stud is 15 lbs.-ft. 
26-28 is a lot of torque.  These studs are going into a soft aluminum 
casting.  I've used some locktite, new nuts and careful torquing on 
these studs.  

Kevin O'Connor