Both are directed "in", just the opposite of what you might think; but they
look symmetrical to me anyway, perhaps it doesn't matter? What's the
verdict of The List?
Ed Woods
-----Original Message-----
From: Lars G. Johnsen <lars.johnsen@lili.uib.no>
To: triumphs@autox.team.net <triumphs@autox.team.net>
Date: Thursday, May 14, 1998 8:21 PM
Subject: TR6 upper wishbone bracket
>
>Listers
>
>Spring is well on its way here in Norway, and the TR6 is under the
>wrench. Noticed that my brackets (fulcrum?) for the upper wishbones were
>facing different ways on different sides of the car. On the left the
>bend in the bracket is directed towards the engine, while on the right
>the bracket bends outwards. From a visual inspection it didn't appear to
>make any difference with respect to the location of the wishbones.
>Wondered if anyone on the list knew something about this, and if
>possible, could tell me what the proper direction of the brackets should
>be.
>
>Best, Lars G. Johnsen
>'74 TR6
|