Hi Sumner:
For the Girling rear drum brake assembly all that is required is to
remove the brake line and the emergency brake cable. The rubber dust
cover more or less fits between the spring plate, retaining plate held in
by the distance piece and the rear backplate. Make sure you slide it
over the emergency brake arm lever first. Pull, push and work the rubber
over and into the backplate between the cylinder retaining plates. You
do not have to remove the cylinder.
Good Luck:'>
H.Ward
TR3A TS54794LO still broken
Sumner Weisman wrote:
>
> One more question on the thread I started yesterday.....
>
> On the rubber dust covers that cover the back of the TR-3 rear brake
> cylinders: What holds them in place? Is there a lip that goes under the
> body of the cylinder? In other words -- do I have to remove both the
> cylinder and the brake line to install it, or just the brake line?
>
> Thanks to the guys who answered yesterday's question about the covers. You
> know who you are.
>
> Sumner Weisman
> 62 TR-3B
|