Jeff Nathanson wrote:
> Jonathan,
>
> Bob has a real good point. If you also rebuilt your carbs, you could
> have put the choke in 180 degrees off. Try pulling the choke cable
> when the engine is hot. The RPM's should decrease (at least they do
> in my TR6). If there's no change or an increase in RPM's, then
> it just might be the choke. To complicate matters, one carb could
> be set correctly and the other incorrect. If you want, undo the screw
> for both carbs and turn the choke individually, one carb at a time.
> You might
> be surprised. Keep us posted. It sound like an real interesting
>problem.
>
> Jeff N.
Yes, when I pull the choke the engine falls down... at idle it's not to bad..
when
hot and when I pull the choke it almost stall.
thanks
|