On Sun, 26 Apr 1998, The Brinkers wrote:
> I have removed the top plate that holds the points & condenser and cleaned
> the inside of my TR6 distributor. There was a lot of dirt inside. Now
> that I have cleaned it all out, what type of lubrication should be used
> inside the distributor? Motor oil, white grease, or WD40? Specifically,
> the counter weights, distributor shaft in the distributor and any other
> parts. In short, what type, where and how much. Please offer any other
Put a smear of engine oil on the moving parts. Put 1 drop down the center
shaft. If the felt thingy is dry, put 1 drop on that too. You don't want
too much oil in the dizzy, it will only foul things up!
|