triumphs
[Top] [All Lists]

Re. Spit Wiper Motor

To: <Triumphs@Autox.Team.Net>
Subject: Re. Spit Wiper Motor
From: "David Hill" <David_J_Hill@email.msn.com>
Date: Sun, 19 Apr 1998 21:34:58 +0100
Hi, Robert.

I expect the Spit 1 wiper motor is the same as most Lucas ones.
On these, the nut holding the outer tube of the wiper rack screws onto a
cast, threaded piece. To separate the rack and motor, you have to undo the
small hex headed screws on the motor's gearbox cover. this will reveal the
large gear, attached to which is a connecting rod which has a pin going into
the square end of the rack itself. Remove the C clip and washer from the
connecting rod, lift the rod out and the rack will follow.

Hope this solves your problem,

Dave Hill




<Prev in Thread] Current Thread [Next in Thread>
  • Re. Spit Wiper Motor, David Hill <=