carbs

[AL WATSON 828-5330 NETWORK & TECH SERVICES <AWATSON@cariboo.bc.ca>]

Hi Fred
 Did you remove your spark plug leads when you rebuilt your carbs?
It sounds as if you might have the plug leads reversed for cylinder 3&4.
The only other thing it might be (in my humble opinion) is the float sticking
open or dirt in the needle valve. try blowing through the gas inlet and
moving the float. don't blow realy hard but you should be able to stop
the flow of air without too much float pressure.
Good luck
Al Watson
Kamloops BC Canada
1972 tr6
4 mini's
1970 datsun 240 sn# 000140