Vern,
I had an exhaust manifold that was broken in two welded one time, and
it lasted for many years. The trick was to take it to the welder
mounted on the head, so that everything is in alignment as it's
welded. He used nickel welding rod. It may be worth a try; it's cheap
so there's very little to lose.
Regards,
Jim Wallace
60 TR3 TS81417
**************************
From: "Burnett VE (Vern) at MSXSOPC" <VB157234@shellus.com>
In the process of doing a head job on my TR4, I found a long crack on
the exhaust manifold. It does not appear to have been leaking yet. It
is 3/4's around the number 4 port. Can this be welded with any
success? Many thanks!
|