Re: Sluggish GT6: Still Searching

[James <james.carpenter@ukaea.org.uk>]

Pop some oil in it, and re-run the test. 

1.
If it's the same compression, then it's brobebly the
cylinder head blown(not in this case), or the valves
leaking. 

2.
If it's better, then it's getting past the piston.  
If so, guess what your looking at :-(

Good luck, and I hope all you have to do is
re-grind the valves. 

Been there, done that but with four cylinders, and 
no two cylinder.  Option 2. 

James
-- 
James Carpenter
Yellow '79 spit wired by a trained marmot