At 03:46 PM 1/22/98 -0500, Shawn Mann wrote:
>Hello Listers,
>
>Well, the subject says it all. I need an air manifold for a 79 Federal
>Spitfire (the kind that attaches to the back of the exhaust manifold,
>not the air rail that attaches to the top of the head). The PO took off
>the air pump systems. I was able to get the pump from a salvage yard,
>but I need the part that connects to the exhaust manifold. Anyone??
>
>
>TIA
>
>Shawn Mann
>
Shawn,
If you have the original exhaust manifold you can probably make a new part.
The ends are the same fittings as on the short u-shaped pipe on the EGR
valve. Buy compression fittings at a plumbing supply or hardware store.
Buy the correct size pipe and bend to your needs. That's how I replaced my
corroded original.
Atwell Haines
'79 Spitfire FM96062 UO
Succasunna, NJ USA
"There are three types of people in this world:
those that are good with numbers, and those that aren't."
|