To: | jmwagner@greenheart.com, owner-triumphs@Autox.Team.Net, triumphs@Autox.Team.Net |
---|---|
Subject: | Re: TR 3 to 4A Valve Cover Gasket |
From: | WBabbitt <WBabbitt@aol.com> |
Date: | Tue, 30 Dec 1997 11:43:04 EST |
Organization: | AOL (http://www.aol.com) |
In a message dated 12/30/97 1:17:21, jmwagner@greenheart.com wrote: <<Does anybody happen to have a NEW stock cork valve cover gasket handy? I need a couple measurements off of it. I'm speaking of the stock gasket for the TR 3 through 4A. thank you. Justin >> Justin, I have the gasket from TRF. While I have it out, these are the principle dimensions: 5.25" side-to-side 18.125" long 13/32" wide 3/16" thick 1 and 3/16" radius (roughly) outside corners Hope this helps, Bill Babbitt TR3A in a Bag (but hopefully not for ever) Gales Ferry, Ct. |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | TR3 head removal, Adrio Taucer |
---|---|
Next by Date: | Re: tr6 radiator duct, Martin Libhart |
Previous by Thread: | TR 3 to 4A Valve Cover Gasket, Justin Wagner |
Next by Thread: | brake fluid, Hank Brakman |
Indexes: | [Date] [Thread] [Top] [All Lists] |