Matrix1643@aol.com wrote:
>
> I'm starting the rebuild of a '60 TR3A. I've taken off the front wings,
> bonnet, front apron, both doors and the windshield. I'm having trouble
> removing the bolts that hold on the windshield mounts and the bolts that are
> inside the edge of the trunk that hold on the rear wings. Both sets of bolts
> have a flat-head type bolt or screw and I've tried many different sizes and
> even an impact wrench as well as many types of penetrants. Is there any way
> I can get these out without havin' to break out the drill?
>
I was never able to get these loose without extreme measures. On the
rear wings, I used a torch. On the windshield screws, I used a drill and
retapped the holes.
--
George Richardson
'57 TR3, TS15559L
(getting ready to paint - and now on the web!)
http://www.merlingroupinc.com/tr3.htm
|