In a message dated 97-10-04 15:36:03 EDT, RBuckner@aol.com writes:
<< have owned a 60 TR3A for 18 years. Some time back I dropped an exhaust
valve seat in my number 4 cylinder. Thank goodness i was at idle at the
time!!!! When I removed the head I found the the valve seat embedded in the
piston with no damage to the cylinder.
My problem is how do I get a new exhaust valve seat and install it into the
head >>
I would find a good automotive machine shop and take the head to them for an
estimate. Cracks can be repaired and I would guess the dropped seat can too
but it might be cheaper to rebuild the other head.
Bob Paul
|